FCTEL E1 to 4 Channels 10/100Base-T Ethernet SNMP Managed Protocol Converter
FC-PCE51converter is based on FPGA, providing one framed E1 interface and one Ethernet interface to achieve 10/100Base-T Ethernet data transmission on the E1 channel. It is a high performance, self-learning Ethernet bridge. This device is the extension device of Ethernet, using network (PDH/SDH/Microwave) that provide E1 channel to achieve local and remote Ethernet interconnecting with serial interfaces at a lower cost. The device has inter-set loop test function to facilitate the project launching and daily maintenance.
Product Features
Ø Can realize monitor and control of remote equipment, OAM management data did not take up user’s timeslot and save E1 bandwidth
Ø E1 supports any timeslot set, the rate is 64K-2048K
Ø The local device can forced the remote device rate follow it
Ø Have the function of E1 interface loop back check, avoid the converter crashed because of interface loop return;
Ø Have indicator when the device is power-off or E1 line is broken or lose signal;
Ø Can set the E1 line that not to send the LINK signal to Ethernet interface while E1 line is broken;
Ø The Ethernet interface supports jumbo frames (2036 Bytes);
Inter-set dynamic Ethernet MAC address (4,096) with local data frame filtering
Ø Ethernet interface supports10M/100M, half/full duplex auto- Negation and AUTO-MDIX
Ø Have Ethernet monitor self-reset function, the equipment will not dead
Ø Can achieve the remote device setting any 5 mode of Ethernet and can closed the AUTO-MDIX function;
Ø Provide 2 clock types: E1 master clock and E1 line clock;
Ø Have three Loop Back Mode: E1 interface Loop Back (ANA),Ethernet interface Loop Back(DIG),Command the remote ,Ethernet interface Loop Back(REM)
Ø Provide 2 impedances: 75 Ohm unbalance and 120 Ohm balance;
Ø Support SNMP Network Management;
Technical parameters
|
E1 Interface
|
Interface Standard; comply with protocol G.703
|
|
Interface Rate; n*64Kbps±50ppm
|
|
Interface Code; HDB3
|
|
E1 Impedance; 75Ω (unbalance), 120Ω (balance)
|
|
Jitter tolerance; In accord with protocol G.742 and G.823
|
|
Allowed Attenuation; 0~6dBm
|
|
Ethernet interface (10/100M)
|
Interface rate; 10/100 Mbps, half/full duplex auto-negotiation
|
|
Interface Standard; Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
|
|
MAC Address Capability; 4096
|
|
Connector; RJ45, support Auto-MDIX
|
|
Power
|
Power supply; AC180V ~ 260V;DC –48V;DC +24V
|
|
Power consumption; ≤10W
|
|
Dimension
|
Mini; 216X140X31mm( WX DXH)
|
|
Piece Weight; 1.1KG
|
|
Working environment
|
Working temperature; -10°C ~ 50°C
|
|
Working Humidity; 5%~95 % (no condensation)
|
|
Storage temperature; -40°C ~ 80°C
|
|
Storage Humidity; 5%~95 % (no condensation)
|
|
FCTEL
|
OEM manufacturer
|
|
Factory
|
Located in Hangzhou
|
|
Special requirements
|
Customized
|
|
Certifications
|
ISO9001, CE
|
|
Payment
|
T/T, L/C, Wester Union, Paypal
|
|
Shippment
|
DHL, Fedex, TNT, UPS, EMS
|
|
Warranty
|
3 years
|
Contact us
Wendy
Skype:linaqueen89
Mail: shl@fctel.com.cn
QQ:127 405 7287
T/F: +86-188 6880 5807
Website: fctel.com.cn
"Design and manufacture the most reliable and efficient fiber optic communications products in the industry."
|
|
FCTEL E1 to 4 Channels 10/100Base-T Ethernet SNMP Managed Protocol Converter Images
|
